The melt-blown filter element produced and sold by Tanvi is a tubular filter element made of nontoxic and odorless polypropylene particles after heating, melting, spinning, pulling, and receiving. If the raw material is mainly polypropylene, it is called the PP melt blown filter element. Melt-blown filter element is not only used in large quantities of water purification but also has excellent chemical compatibility, suitable for filtration of strong acids, strong alkalis, and organic solvents. Strong dirt holding capacity, long service life, and low cost
High filtration precision, large flow, uniform structure, large dirt holding capacity, and long service life
Good chemical compatibility without any additives
High dirt holding capacity
Pharmaceutical industry: pre-filtration of various injections, liquid medicines, injection bottle washing water, pre-filtration of large infusions and various antibiotics, and traditional Chinese medicine injections
Food industry: filtration of alcohol, beverages, and drinking water.
Electronics industry: pre-filtration of pure water and ultrapure water.
Petroleum and chemical industry: filtration of various organic solvents, acids, and alkalis, oil field water injection filtration
⚫ Filtration accuracy: 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm;
⚫ The outer diameter of the filter element: φ60mm, φ65mm; (can be customized)
⚫ Inner diameter of filter element: φ28mm, φ30mm; (thread, flat)
⚫ Length of filter element: 10", 20", 30", 40"; (can be customized)
⚫ Maximum pressure resistance: ≤0.4MPa; recommended maximum pressure difference: 0.2MPa;
⚫ Wire winding type: polypropylene, absorbent cotton, glass fiber
⚫ The inner frame of the filter element: PP, stainless steel
